Basic Info.
Certification
ISO9001, CCS
Salt Rejection Rate
No Less Than 98%
Capacity
1800 Cubic Meters Per Day
Voltage
110~450V ; 50Hz / 60Hz
Operation Pressure
Less Than 6.5MPa
Control System
Automatic / Manual
Operation Temp
0~45 Degree Centigrade
Transport Package
International Standard Export Package
Origin
Zhuhai City, Guangdong Province, China
Product Description
Ro water purifier seawater ultrafiltration plant uf systemUF system <1> Product Description
1.1)Brief Introduction
UF system is a pressure-driven membrane separation process. Through the micro-filtration of the membrane surface, particles and impurities with a diameter of 0.002~0.1 μm can be trapped, which can effectively remove colloids, silicon, proteins, microorganisms and macromolecular organics in the water.When the liquid mixture is pushed through the membrane surface under a certain pressure, solvents and small molecules pass through the membrane, while macromolecules are trapped, thereby achieving size, intermolecular separation and purification purposes. Can be widely used in the separation, concentration and purification of substances.
1.2)Specification
Product Name | UF system |
Model | WY-UF-1800 |
Water Yield | 1800m³/d |
Voltage | 110~450V;50Hz/60Hz |
Desalination Rate | ≥98% |
Operation Pressure | <6.5Mpa |
Main Material | Stainless Steel |
Protection Level | IP54 |
Working Environment Temp | 0~45°C |
Suggest Input Water Temp | 5~45°C |
Working Environment Air Humidity | 20~90% |
Control System | Automatic / Manual |
Certificate | ISO9001, CCS |
Life Span | 15 Years |
Warranty | 2 Years |
Customized | Acceptable |
1.3)Main Features of UF system
1.3.1)Water ultra filtration system is with room temperature operation and without conversion,which is good for energy conservation, particularly suitable for the separation of heat-sensitive substances.
1.3.2)Fewer supporting devices makes it easy operation and maintenance, low maintenance costs.
1.3.3)Ultrafiltration membranes resistant to chemical corrosion, PH wide range of adaptation.
1.3.4)The membrane area is the largest part in the device,but it is with the lowest investment cost and easy cleaning.
1.4)Product Images
<2> Package & Shipment
2.1)Package
UF system is with international standard export package.
2.2)Shipment
We will choose the most suitable shipment according cistomers' need.
<3> Our Services
3.1)Installation & Commissioning
As the supplier,we have the responsibility to complete the installation & commissioning for customers before shipment.For customers need,we're available to finish that in customers' requested place.
3.2)Training
We will provide clients technical training,which includes equipment structure & maintenance, control & operation. In this way, the technicians of customers can grasp relevant skills after training.
3.3)Quality Assurance & After-sales
Equipment mechanical part is given total quality assurance within two years from the equipment installation and commissioning completed acceptance.During the warranty period,our company will arrange technologist to call you and ask about the equipment using situation very quarter.Consumable materials and vulnerable parts which are normal wear and tear are not within the warranty.Outside the quality assurance period,we can also provide comprehensive technical support and maintenance services for customer.
<4> About Our Company
4.1)Company Profile
Zhuhai Wangyang Water Treatment Equipment Co,.Ltd. is a high-tech enterprise with integration of scientific research,new product development,production,sales and installation.
We have specialized devices respectively for sea water,brackish water,pure water,EDI hyper pure water,reclaimed-water recycling,etc.Our product is widely used in marine drilling platform,ocean going vessel,electroplating metallurgy,chemical industry,electric power,medicine trade and so on.With professional technology and high quality,we've got ISO9001 and CCS for our product,and we'll always persist in product improvement.
We adhere to our principle "Customer First,Quality Service,Excellent Quality",and strive to become a long-term and outstanding partner both at home and abroad.
4.2)Certificate
4.3)Exhibitions
<5> FAQ
Q1: Are you manufacturing company or trading company?
A:We're a professional manufacturer for water treatment equipment.And always welcome to visit our factory.
Q2: How should I select the plant?
A:It depends on your requested parameters,such as raw water source,water quality,water yield,voltage,etc.
Q3: What's your suggest for maintenance?
A: 1)check all circuit whether damaged;
2)check valve whether malfunctioning phenomenon;
3)check all pipes for leaks;
4)If long time no use,you should add protective solution to protect the reverse osmosis:
4.1)Open inlet which in the front of the high-pressure pump (see illustration), make well the protective solution in the water tank ,then connect with the tank via pipe , start the water tank pump, when the protective solution full filled with reverse osmosis membrane group, turn off the water tank pump, close the inlet. Meanwhile every day to observe, such as protection fluid leakage situation, should replenish the above step.
4.2)Before equipment start-up , protective solution should be clear up.
Q4: Could you offer some info about troubleshooting?
A:Our pleasure in doing that.
1)high-pressure pump:
Each work 200 hours to inspect, pressure whether normal, whether the crankcase short of oil, the pump whether abnormal and other tests, such as abnormal working, in accordance with the manufacturers instructions for maintenance. If do not have maintenance skills, please timely contact with the manufacturer, we will maintenance for client.
2)booster pump:
Maintenance, inspection, refer to the high-pressure pump, the specific details, see the lift pump manual requirements. Equipment failure, if you are able to maintenance and repair, the manufacturer can provide technical support. If do not have skills to repair, made it clear that the cause of the malfunction and fault coverage, please contact the manufacturer.
Q5: What's your payment term?
A:PayPal,T/T,Western Union,L/C available;40% deposit before manufacturing,and the rest should be paid before shipment.
<6>Why Choose Us?
6.1)Our company has obtained ISO9001 quality management system certificate, Inspection certificate of China classification Society(CCS) and the letter of patent for seawater desalination equipment in container.
6.2)We are the direct manufacturer. We have our own factory so that we can offer you high quality product with a good price.
6.3)Owning a self brand "WANGYANG" and a professional practical engineer team.
6.4)Total water solution is available.
6.5)The punctual delivery of goods, quality and quantity guaranteed.
6.6)8 years experience, OEM&ODM available.
Address:
No. 8 Technology Road 1, Tangjiawan Town, Xiangzhou District, Zhuhai, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Zhuhai Wangyang Water treatment equipment Co., Ltd. As a professional water treatment manufacturer, began as a vision in the early 2010 to provide efficient and high-quality water treatment solutions for people and places around the world. We have developed a range of products to produce fresh water or industrial water from sources such as seawater, brackish water or tap water. Capacity range from 1000 liters to more than 5000 m3 per day.
Equipment is widely used in all types of ships (fishing, yachting, offshore, commercial and military), land, industry and islands.
A team at your service
The team is composed of first-class engineers, sales and technical support staff, from product development and design to delivery, to provide professional solutions and after-sales technical support to your needs.
Quality
From the entry of the components into the warehouse, Wangyang water treatment carries out strict control at all stages of production.
From the simplest to the most complex, all equipment are tested in the test area before packaging:
Test with raw water similar to that specified at the order.
Test items: Fresh water flow, water production conductivity, operating pressure, high and low pressure safety protection test, leaking test.