| Customization: | Available |
|---|---|
| Certification: | ISO9001 |
| Salt Rejection Rate: | 98.5% |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Parameters | |
| Water yield | 500 litres per hour |
| RO product water quality | TDS<50mg/L |
| Desalination rate | >98.5% |
| Recovery rate | 60%(Depending on temperature and inlet water quality) |
| Operation pressure | 1~2Mpa |
| RO Membrane | 4040, 2 pcs |
| Pressure vessel | 450PSI, 1 Core, 2pcs |
| Power | 1.7KW |
| Voltage | AC220V~380V / 50Hz~60Hz / Three phase |
| Protection grade | IP54 |
| Dimensions | 900*440*1500 mm |
| Net weight | 150Kg |
* 1. Equipment can be customized according to customer requirements.
System function
1. Low-pressure shutdown protection. When the pre-treatment water supply is insufficient and the high-pressure pump inlet pressure is lower than 0.05MPa, the protection action will be automatically stopped and an audible and visual alarm will be issued.
2. The pretreatment is equipped with an automatic control multi-way valve, and the multi-media filter and the activated carbon filter are automatically cleaned under a certain pressure difference.
3. The reverse osmosis membrane cleaning system is equipped with physical cleaning, chemical cleaning and filling of the reverse osmosis membrane module.
Process flow diagram
1. Feed pump: Equipped with a stainless steel pump, to provide sufficient pressure for subsequent filtration.
2. Multimedia filter: Mainly to remove turbidity, which is used to filter out large particles and suspended solids in raw water.
3. Active carbon filter: Uses the granular activated carbon to further remove residual impurities of residual chlorine, organic matter and suspended matter in the water, and provides favorable conditions for the subsequent reverse osmosis treatment.
4. Precision filter: Further filtration, protection of reverse osmosis membrane.
5. High pressure pump: Provide enough pressure for reverse osmosis system.
6. Reverse osmosis system: The core part of pure water equipment, the production of high-purify water.
7. UV sterilizer: Does not alter the taste or the chemistry of the water and it is an environmental responsible procedure of treating water with zero waste or by-products produced. UV water sterilizers require minimum maintenance and have a low operational cost.
Reverse Osmosis Technology
The reverse osmosis membrane is an artificial semipermeable membrane made of a semi-permeable membrane that has certain characteristics and is a core component of reverse osmosis technology.
The principle of reverse osmosis technology is to remove these substances and moisture according to the osmotic pressure of the solution, according to the fact that other substances cannot pass through the semipermeable membrane. The membrane pore size of the reverse osmosis membrane is very small, so that dissolved salts, colloids, microorganisms, organic matter, and the like in the water can be effectively removed.
The system has the advantages of good water quality, low energy consumption, no pollution, simple process and easy operation.
Packaging: International standard export package; And we can pack according to customers' requirement.
Delivery Time: 15 Working Days.
Our Services
1. After qualified of the equipment, we will supply two year guarantee, control system two year guarantee, free charge for wearing parts, and other spare parts with cost price.
2. If the technicians of the buyer couldn't solve the problems themselves, the after-sales department will supply long range guide service by phone.
3. If relevant measurements couldn't solve the problems, we will send the technicians to the buyer factory, clear the fault or relevant technical problems on site, the charges will reference to the installation and debugging charges.
4. After guaranteed, the seller will supply widely favorable technical support, after-sales service for the lifetime: favorable price for the wearing parts and other spare parts.
FAQ
1)Q: Are you a factory or trading company?
A: Yes, we are a manufacturer with designing, manufacturing, marketing and exporting.
We have sophisticated experience and professional knowledge & technology.
Both OEM and ODM orders are available.
2)Q: Where is your factory located? How can I visit there?
A: Our factory is located in No.8, Keji Road 1, Tangjiawan, Xiangzhou district, Zhuhai City, Guangdong, China.
All our clients, from home or abroad, are warmly welcome to visit us!
We are expecting to establish long-term business relations with you.
3)Q: What kinds of water treatment equipment do your company offer?
A: We are specialized in designing and manufacturing the products as follow:
Seawater desalination system
Brackish water desalination system
Pure water treatment system
Ultra filtration system
EDI
Reclaimed - water recycling system
Ion- exchange system
Water softening system
){kind=link}